We are a production source, professional manufacturer, factory, supplier. Qingdao Haitongda 6-Speed rotational Viscosity is direct-reading instruments which are available in six- speed designs for use on either 50 Hz or 60 Hz electrical power. The standard power source is 220 volts, but all models may be fitted with a transformer, making operation with 220/110 volts possible.
Qingdao Haitongda 6-Speed rotational viscometers are used in research and production. These viscometers are recommended for evaluating the rheological properties of fluids, Newtonian and non-Newtonian. The design includes a Rotor Sleeve, Bob, F1 or F0.2 Torsion Spring, and a stainless steel sample cup for testing according to American Petroleum Institute Recommended Practice for Field Testing Water Based Drilling Fluids, API RP 13B-1/ISO 10414-1 Specification.
Funnel viscometer is a simple equipment for measuring viscosity daily, used to determine the relative viscosity of drilling fluid (compare with water). Due to the measured data are largely affected by colloid ratio and proportion, it cannot be compared directly with the data measured by rotational viscometer, static shear force and rheometer.
Marsh Funnel Viscometer MLN-3 is a simple equipment for measuring viscosity daily, it is produced according to American API standard. The viscosity of drilling fluid is measured by the time of quantitative drilling fluid flows out of the funnel.
Marsh funnel viscometer is a simple equipment for measuring viscosity daily, it is produced according to American API standard. The viscosity of drilling fluid is measured by the time of quantitative drilling fluid flows out of the funnel. The instrument is mainly composed of funnel, measuring cup and sample cup, etc.
Marsh funnel viscometer is a simple equipment for measuring viscosity daily, it is produced according to American API standard. The viscosity of drilling fluid is measured by the time of quantitative drilling fluid flows out of the funnel. The instrument is mainly composed of funnel, measuring cup and sample cup, etc.
Marsh Funnel Viscometer MLN-4A is a simple equipment for measuring viscosity daily, it is produced according to American API standard. The viscosity of drilling fluid is measured by the time of quantitative drilling fluid flows out of the funnel.
Cup heater model JR is mainly used with our product six-speed rotary Viscometer model ZNN-D6, which simulate the constant temperature of well drilling fluid to measure rheological parameters, and also heat other fluids at constant temperature.
Torsional spring dynamometer (Torsional Spring Dynamometer NLJ-A) is a special testing instrument designed to correct the stiffness and indication error of torsion spring in viscometer. It is mainly composed of base, runner, fixed plate, column, crossbeam and etc.
The Funnel Viscometer Model ZLN-1A is used to measure relative viscosity of the drilling fluids, comparatively with water viscosity. It is widely used in Petroleum or Geology industry, and especially can be used to measure daily drilling fluid viscosity data in drilling field.
The Marsh Funnel (Marsh Funnel Viscometer Model MLN-3) is a simple device for indicating viscosity on a routine basis. When used with a measuring cup the funnel gives an empirical value for the consistency of a drilling fluid. The number obtained depends partly on the effective viscosity at the rate of shear prevailing in the orifice, and partly on the rate of gelation.
The Marsh Funnel (Marsh Funnel Viscometer Model MLN-3A) is a simple device for indicating viscosity on a routine basis. When used with a measuring cup the funnel gives an empirical value for the consistency of a drilling fluid. The number obtained depends partly on the effective viscosity at the rate of shear prevailing in the orifice, and partly on the rate of gelation.
The Marsh Funnel (Marsh Funnel Viscometer Model MLN-4) is a simple device for indicating viscosity on a routine basis. When used with a measuring cup the funnel gives an empirical value for the consistency of a drilling fluid. The number obtained depends partly on the effective viscosity at the rate of shear prevailing in the orifice, and partly on the rate of gelation.
The Marsh Funnel (Marsh Funnel Viscometer Model MLN-4A) is a simple device for indicating viscosity on a routine basis. When used with a measuring cup the funnel gives an empirical value for the consistency of a drilling fluid. The number obtained depends partly on the effective viscosity at the rate of shear prevailing in the orifice, and partly on the rate of gelation.
