Differential Sticking Tester Model NF-2

Differential Sticking Tester Model NF-2 - Most incidences of stuck pipe are caused by differential-pressure effects. Excessive differential pressures across lower-pressure permeable zones can cause the drillstring to push into the wellbore wall where it becomes stuck. When differential sticking occurs, spotting fluid can sometimes free the drillpipe.
Product Description

China Differential Sticking Tester Model NF-2

China Differential Sticking Tester Model NF-2 manufacturers

 

1. Product Introduction of Differential Sticking Tester Model NF-2

 

Most incidences of stuck pipe are caused by differential-pressure effects. Excessive differential pressures across lower-pressure permeable zones can cause the drillstring to push into the wellbore wall where it becomes stuck. When differential sticking occurs, spotting fluid can sometimes free the drillpipe.

 

Differential sticking may be identified by the following characteristics:

 

  • Pipe sticks after remaining motionless for a period of time
  • Pipe cannot be rotated or moved when circulation is maintained

 

The Differential Sticking Tester was designed to determine how likely a given drilling fluid will be to produce a "stuck pipe" situation and how effective a given drilling fluid treatment or application of spotting fluid in any given drilling fluid would be in reducing this tendency. This measurement is called the "Stuck Tendency Coefficient". It takes into account both the stickiness and the cake building capability of the drilling fluid. The "Stuck Tendency Coefficient" is determined by the Timed Filtrate Test.

 

The unit can be pressurized by the CO2 regulator assembly or from any nitrogen source. If Nitrogen is to be used, the Differential Sticking Tester must be fitted with a suitable Nitrogen regulator, gauges, relief valve, hose and fittings.

 

The measurement can be made using either the flat-faced torque plate or the 12-1/2" (31.75 cm) spherical radius plate which approximates pipe in casing or collars in borehole contact geometry. (Both are provided.) In the event of a "sticky" sample that tends to adhere more to the torque plate than to the filter paper, stainless steel micro-corrugation disks are provided, to help ensure success of the test.

 

2. Product Type Specification of Differential Sticking Tester Model NF-2

 

Mode

Name

Configuration

Characteristic

NF-2

The Differential Sticking Tester

Pneumatic pressure rod with cylinder assembly

The adhesion between the adhesive disc and the filter cake depends on the air pressure acting on the pressure cylinder to exert pressure on the adhesive disc

 

3. Product Technical Specification of Differential Sticking Tester Model NF-2

 

No.

Technical Specification

1

Work stress

3.5MPa

2

Maximum pressure of drilling fluid cup

5MPa

3

Diameter of adhesive disc

φ50.7 mm

4

Filter area

22.6cm2

5

Cup capacity

240ml

6

Air supply

Nitrogen, carbon dioxide gas (not containing oil, water and other impurities) (oxygen is strictly prohibited), its rated pressure should be greater than 5Mpa

7

Net weight / Gross weight

9.8kg/15.24kg

8

Overall dimensions

500×270×510mm

9

Packing size

560×425×265mm   310×290×285mm

 

4. Product Detail of Differential Sticking Tester Model NF-2

 

The Differential Sticking Tester in model NF-2 is a cumulative test and analysis instrument. The instrument is mainly composed of bracket, mud cup, tee, pressure cylinder, etc. The instrument has the characteristics of compact structure, high measuring precision and convenient operation.

 

Differential Sticking Tester Model NF-2

 

5. Company Introduction of Differential Sticking Tester Model NF-2

 

China Haitongyuanda Special Instrument factory is a professional supplier of Differential Sticking Tester Model NF-2, with good quality and low price. We sincerely recruit domestic and foreign agents. Differential Sticking Tester Model NF-2 products are exported to dozens of foreign countries and regions. Our company is committed to the R&D and manufacturing of drilling fluid analyzer, oil well cement tester, oilfield laboratory integrated engineering solutions and experimental instrument maintenance services. Over the past 40 years, with the care and support of oilfield users, experts from various industries and engineers and technicians, our products and technologies have been tested by the market making. Haitongda special analytical instruments have grown to world-famous brands. Our company has researched and developed testing instruments needed in unconventional oil and gas resources, deep water, natural gas hydrate and intelligent drilling, and successively produced a variety of new products, such as ultra-HTHP rheometer, drilling fluid online testing system and deep water low temperature drilling fluid testing system, which timely met the needs of technological progress in the drilling industry. At present, we are providing quality services and practical products to more than 3,000 customers in more than 20 countries and regions around the world.

 

6. FAQ

 

1): Are you a manufacturer or a trading company?

A1: We are manufacturer.

 

2): What is your main brand?

A2: Our brand is Haitongda, which is famous in China and other nation. Also we do OEM.

 

3): What are your business scope and product classification?

A3.Business scope. Mud analysis instrument, electronic products, special instrument, mold design and manufacturing; Instrument maintenance and sales, import and export of goods and technologies.

 

Product classification including drilling fluid analysis instrument oil ell cement testing instrument and field overall solution, including 22 small categories and over 120products.

 

4): What is your MOQ for the order?

A4: Testers per 1 set.

 

5): What is the warranty period of your instrument?

A5: One year.

 

6): Can l get better offer if our order can be bigger?

A6: Certainly. We will give you better prices based on the quantity for your order.

 

7): What certificate do you have for your instrument?

Q7: ISO, SGS and so on.

 

8): What is your lead time for our order?

A8: For new order: 3 weeks.

For stock order: 3 working days after T/T. Based on FOB Qingdao.

 

9): What is your advantage of your factory?

A9: We are the original oil ministry designated drilling fluid analysis equipment manufacturer in China, which was founded in 1968.

 

10): What is the process to become an agency?

A10: Please send us mail enquiry, then we will reply you as soon as possible.

 

Differential Sticking Tester Model NF-2 manufacturers

China Differential Sticking Tester Model NF-2 suppliers

Send Inquiry
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

Verify Code